Surface Gauges and Testers arrow Mitutoyo Surftest Surface Roughness Tester

Surftest Surface Roughness Tester



Part#: Surftest SJ-210
Supplier: Mitutoyo
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

This user-friendly Mitutoyo Portable Surface Roughness Tester (Surftest SJ-210 series) is a small, lightweight, and extremely easy to use surface roughness measurement gauge that can be easily carried with you and used on-site. Equipped with 2.4-inch color graphic LCD with backlight, the Surftest SJ-210 provides excellent readability and an intuitive display that's easy to negotiate.

 

 

Thanks to its advanced data storage capabilities the Mitutoyo SJ-210 can store large quantities of measured profiles and conditions. Up to 10 measurement conditions and one measured profile can be stored in the internal memory. If you need more storage space to store large quantities of measured profiles and conditions, an optional memory card can be used as an extended memory.

In addition to calculation results, the Surftest SJ-210 Portable Surface Roughness Tester displays assessed profiles and graphical data, load curves, and amplitude distribution curves. Assessed profiles can also be zoomed up and down.

Buy this Mitutoyo Portable Surface Roughness Tester (Surftest SJ-210 series) in Toronto (also in Canada or Greater Toronto Area) from us!

Features

  • The 2.4-inch color graphic LCD provides excellent readability and an intuitive display that is easy to negotiate. The LCD also includes a backlight for improved visibility in dark environments.
  • The Surftest SJ-210 can be operated easily using the buttons on the front of the unit and under the sliding cover.
  • Up to 10 measurement conditions and one measured profile can be stored in the internal memory.
  • An optional memory card can be used as an extended memory to store large quantities of measured profiles and conditions.
  • Access to each feature can be password-protected, which prevents unintended operations and allows you to protect your settings.
  • The display interface supports 16 languages, which can be freely switched.
  • An alarm warns you when the cumulative measurement distance exceeds a preset limit.
  • The Surftest SJ-210 complies with the following standards: JIS (JIS-B0601-2001, JIS-B0601-1994, JIS B0601-1982), VDA, ISO- 1997, and ANSI.
  • In addition to calculation results, the Surftest SJ-210 can display sectional calculation results and assessed profiles, load curves, and amplitude distribution curves.

Specs

Measuring range: X axis Standard & retractable drive unit type: 69" (17.5mm)
Traverse tracing drive unit type: .22" (5.6mm)
Z axis (Detector) Range 14200 μin (-7900μin~+6300μin) / 360μm (-200μm ~ +160μm)
Range / Resolution 14170μin /.8μin (360μm / 0.02μm), 4000μin / .2μin (100μm / 0.006μm),1000μin /.08μin (25μm / 0.002μm)
Measuring speed Measuring: 0.01, 0.02, 0.03 in/s (0.25mm/s, 0.5mm/s, 0.75mm/s) Returning: 1mm/s
Measuring force / Stylus tip 0.75mN type: 0.75mN / 2μmR 60°, 4mN type: 4mN / 5μmR 90°
Skid force Less than 400mN
Analysis graphs Bearing area curve / Amplitude distribution curve
LCD dimensions 1.45 x 1.93" (36.7×48.9 mm)
Calculation result display Vertical display: 1 parameter / 3 parameter / trace to measurements
Horizontal display: 1 parameter / 4 parameter / trace to measurements (Horizontal display is invertable)
Printing function
(Dedicated printer is required separately.)
Measurement conditions / Calculation results / Calculation results for each sampling length /
Assessed profile / Bearing area curve / Amplitude distribution curve / Environment setting information
Power-saving function Auto-sleep off function (10-600sec)
Power supply Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter
*Charging time: about 4 hours (may vary due to ambient temperature)
*Endurance: about 1000 measurements (differs slightly due to use conditions / environment)

Drive units


Need to have this new Mitutoyo Surftest SJ-210 Surftest Surface Roughness Tester calibrated? While this gauge has passed a quality control check, having a calibration certificate for surface gauges and testers might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Mitutoyo gauge to be calibrated? We might be able to calibrate Mitutoyo surface gauges and testers (Mitutoyo Surftest SJ-210 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescription Stylus tip radius Dect measuring force TypeIn Stock
178-561-01ASurftest SJ-210, 0,75 mN 2�m 0.75mN Standard 0
178-561-02ASurftest SJ-210, 4mN 5�m 4mN Standard 0
178-563-01ASurftest SJ-210 IN 0.75mN 2�m 0.75mN Retractable 0
178-563-02ASurftest SJ-210R, 4mN 5�m 4mN Retractable 0
178-565-01ASurftest SJ-210 IN 0.75mN 2�m 0.75mN Transverse 0
178-565-02ASurftest SJ-210S, 4mN 5�m 4mN Transverse 0

More Recommendations for Surface Gauges And Testers