Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge
This stroboscope is ideal for quality control, motion analysis, maintenance procedures, and speed measurements of motors. Tripod mountable AC operated with 6-foot power cord
features
Simply aim and synchronize the strobe’s flash rate (fpm) with the speed (rpm) of the object
Direct reading of RPMs
Exclusive one-chip microcomputer LSI circuit and quartz crystal control timebase assures accuracy of ±1%
4-digit, 0.3" high LED display
Duty cycles from 5 to 30 minutes (depending on RPM range)
Tripod mountable AC operated with 6-foot power cord
specs
Flash Range
100 to 100,000 fpm (flashes per minute)
Resolution
1 rpm/fpm
Accuracy
±1%: 100 to 5000 fpm; ±0.05%: ≥ 5000 fpm
Sampling Rate
1/second
Power Supply
110 VAC, 50/60 Hz
Dimensions
8.3 x 4.8 x 4.8" (210 x 120 x 120mm)
Weight
2.2lb (1kg)
Need to have this new Reed IT-K4020 K4020 Stroboscope calibrated? While this gauge has passed a quality control check, having a calibration certificate for stroboscopes might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.
Do you have an old Reed gauge to be calibrated? We might be able to calibrate Reed stroboscopes (Reed IT-K4020 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.
Ordering info
or contact us for technical assistance on K4020 Stroboscope.
Reed K4020 Stroboscope
