Sound Level Meters arrow MTP Noise Level Meter (data logger)

Noise Level Meter (data logger)



Part#: 1810
Supplier: MTP
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

Features:

 

  • confirms to the IEC61672-1 class 2
  • Max & min measurements
  • Over and under range display
  • A & C weighting
  • Fast & slow response
  • Analog AC/DC outputs for connection to frequency analyzer or X-Y shaft recorder (AC=1Vrms, DC=10mV/dB) 

Specifications:

 

  • Accuracy: ±1.4dB
  • Frequency range: 31.5Hz ~ 8KHZ
  • Dynamic range: 50dB
  • Level ranges: Lo: 30db ~ 80dB
  • Med: 50dB ~ 100dB
  • Hi: 80dB ~ 130dB
  • Auto: 30dB ~ 130dB
  • Frequency weighting: A/C
  • Time weighting: FAST (125ms), SLOW (1s)
  • Microphone: ½ inch electret condenser microphone
  • Display: 4 digit LCD display with a resolution of 0.1dB
  • Display update: 2 times/sec
  • MAX Hold: Hold the Maximum reading
  • MIN Hold: Hold the Minimum reading
  • HOLD: Hold readings
  • Alarm functions: OVER is when input exceeds upper limit of range
  • UNDER is when input is less than upper limit of range
  • Analog output: AC/DC outputs from earphone outlet
  • AC = 1Vrms, DC = 10mV/dB
  • Data output: USB data traffic
  • Auto power off: Meter automatically shuts down after approx. 15 minutes of inactivity
  • Power supply: One 9V battery, 006P or NEDA1604 or IEC 6F22
  • Power life: About 30 hours
  • Operation temperature: 0ºC º~ 40ºC / Humidity temperature: 10%RH ~ 90%RH
  • Storage temperature: -10ºC ~ +60ºC / Storage humidity: 10%RH ~ 75%RH
  • Dimension: 278 (L) x 76 (W) x 50 (H) mm
  • Weight: 350g
  • Accessories: English and French instruction manual, battery, screwdriver, 3.5mm earphone plug, windscreen, software, USB cable, tripod and DC 9V power supply 

Need to have this new MTP 1810 Noise Level Meter (data logger) calibrated? While this gauge has passed a quality control check, having a calibration certificate for sound level meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old MTP gauge to be calibrated? We might be able to calibrate MTP sound level meters (MTP 1810 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
1810MTP Noise Level Meter (data logger)piece 0

More Recommendations for Sound Level Meters