Light Meters arrow MTP Digital Illuminance Meter

Digital Illuminance Meter



Part#: 1210
Supplier: MTP
Calibration Certificate: is available at extra cost
Digital Light Meter (0,93 MB)
Photo Gallery - click any photo to enlarge

It meets CIE photopic spectral response. It is fully cosine corrected for the angular incidence of light. The illuminance meter is compact, tough and easy to handle owing to its construction. The light sensitive component used in the meter is a very stable, long-life silicon photo diode and spectral response filter.

Features:

  • Light-measuring levels ranging form from: 0.01lux~0.1klux/0.01fc~0.01kfc,repeatedly.
  • High accuracy and fast response.
  • Data-hold function for holding measuring values.
  • Unit and sign display for easy reading.
  • Automatic zeroing.
  • Meter corrected for spectral relative efficiency.
  • Correction factor does not need to be manually calculated for non-standard light sources.
  • Short rise and fall times.
  • Peak-hold function for tracing the peak signal of light pulse with least duration 10μs and keep it.
  • Capable of selecting measuring mode in lux or fc scale alternatively.
  • Auto power off 30 minutes.
  • Maximum and minimum measurements.
  • Relative reading & Reset function.
  • Easy to read large backlit display

Specifications:

  • Display : 3-3/4 digit LCD with high speed 42 segment bargraph.
  • Measuring Range: 40.00 lux,400.0 lux,4000 lux,40.00 Klux and 300.0 klux /40.00 fc,400.0 fc,4000 fc,30.00 kfc.
  • NOTE: 1fc=10.76lux, 1Klux=1000lux,1Kfc=1000fc
  • Overrange Display: LCD will show “OL” symbol.
  • Spectral Response: CIE Photopic. (CIE human eye response curve).
  • Spectral Accuracy: CIE Vλ function f1’≦6%
  • Cosine Response: f2’ ≦2%
  • Accuracy: ±5% rdg±0.5% f.s.
  • Repeatability: ±3% 
  • Sampling Rate: 13.3 times/sec of analog bar-graph indication; 1.3times/sec of digital display.
  • Photo Detector: One silicon photo diode and spectral response filter.
  • Operating temperature & Humidity: 0℃ to 40℃ (32℉to 104℉) & 0% to 80% RH.
  • Storage Temperature & Humidity: -10℃ to 50℃ (14℉ to 140℉) & 0% to 70% RH.
  • Power Source: 1 piece 9V battery.
  • Photo detector Lead Length: 150cm (approx.);
  • Photo detector Dimensions: 115L×60W×20H(mm);
  • Meter Dimensions: 170L x 80W x 45 H
  • Weight: 390g.
  • Accessories: Carry case, instruction manual, battery. 

Need to have this new MTP 1210 Digital Illuminance Meter calibrated? While this gauge has passed a quality control check, having a calibration certificate for light meters might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old MTP gauge to be calibrated? We might be able to calibrate MTP light meters (MTP 1210 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
1210MTP Digital Illuminance Meterpiece 0

More Recommendations for Light Meters